Interior Design

Loading…

Your walls

Use Set up on a wall to choose, before placing it, what it runs parallel or square to and which wall it ends on (a T). When both are set, a single click places the whole wall.

Pick a wall, then click on the sheet to set its start. Its length is locked; move the mouse to aim it and click to place. The next wall chains from the end.

Layouts

Drag to move; pieces snap flush to walls. Drag the round handle to rotate (snaps to wall angles; hold Shift for free). Each layout keeps its own furniture; walls and outlets are shared.

Built in every layout

Cupboards, posts, the overhang and other fixed pieces belong to the building, so every layout has them and every clearance counts them. Add one from the furniture menu.

Lighting

MapMeasure at

Daylight Sun and sky in the map Day

Time

North

° clockwise from the top of the plan

Latitude

° north

Outlets

Pick Outlet in the top bar, then click a wall. Drag an outlet to slide it along its wall.

Rooms

Perimeter–

Floor area–

Walls placed–

Closure–

New rooms Wall thick. Measured On the inside face (walls extend outward)

Keys

D draw · V select · Esc/Enter end chain · hold Shift for free angle (15° snap otherwise) · type a length like 8'4" or 100@90 while drawing · drag empty sheet to pan, wheel to zoom · Delete removes selected wall · use Align to lock a wall parallel or square to another, no angle needed.

grid 1 ft